Seiler 4×8 Intervals for Cyclists: A Complete Guide

Photo of author
Written by
Published:

Seiler 4×8 intervals are one of the most research-backed high-intensity sessions in endurance cycling: four 8-minute efforts ridden at the hardest pace you can repeat, split by short recoveries. This guide explains where the workout came from, why eight minutes hits a physiological sweet spot, exactly how to pace and build a session, and how to fit it into your training week for bigger gains in VO2 max and threshold power.

What Are Seiler 4×8 Intervals?

The session is simple to describe. You ride four work intervals of eight minutes each at the highest intensity you can hold and repeat across all four efforts, with roughly two minutes of easy spinning between them. That is the whole workout: four hard eights, three short recoveries, bookended by a warm-up and cool-down.

The format is named after Stephen Seiler, the American-Norwegian exercise physiologist whose research group at the University of Agder compared it directly against shorter and longer interval formats. Unlike all-out sprints, the 4×8 is a sustained, controlled effort. It sits in the long-interval family: hard enough to push your aerobic ceiling, but measured enough that you can keep the power honest for a full eight minutes, four times over. That combination of dose and sustainability is exactly what makes it effective.

The Research Behind the 4×8

The 4×8 earned its reputation from a 2013 study by Seiler and colleagues (Seiler, Joranson, Olesen and Hetlelid), published in the Scandinavian Journal of Medicine and Science in Sports. The researchers took 35 recreational cyclists, each with a VO2 max around 52 ml/kg/min and training roughly six hours a week, and split them into four groups for seven weeks.

One group simply added more low-intensity volume with no intervals. The other three performed interval sessions twice a week on top of their base riding: one group did 4×4 minutes, one did 4×8 minutes, and one did 4×16 minutes. Everyone was asked to work at the hardest pace they could sustain for their assigned interval length.

The 4×8 group produced the largest average gains of the four. Across seven weeks they saw roughly a 10% increase in VO2 peak and about a 16% improvement in power at 4 mmol/L of blood lactate, a marker that sits close to functional threshold. The 4×4 and 4×16 groups both improved, but by smaller margins, and the low-intensity-only group changed very little. For a format this simple, that is a striking result, and it is why coaches keep coming back to the eight-minute interval.

Why Eight Minutes Is the Sweet Spot

The logic comes down to how riders actually pace different interval lengths. Four-minute efforts are short enough that most people go out too hard, spike early, and fade, spending less quality time at a high aerobic load than it feels like. Sixteen-minute efforts have the opposite problem: to survive them, riders instinctively back off, so the intensity drifts down toward tempo and never truly stresses VO2 max.

Eight minutes threads the needle. It is long enough that you accumulate meaningful time working at around 90 to 95% of VO2 max, yet short enough that the pace stays repeatable rather than collapsing. A later Seiler-group study (Sylta and colleagues, 2017) reinforced the point: when cyclists were told to ride each session maximally, the 16-minute group rarely reached a genuinely maximal effort, while shorter intervals were far more likely to be ridden hard. The eight-minute interval reliably lands in the productive middle.

Setting Your Intensity

The target is not a fixed number but a behaviour: the highest average effort you can hold across all four intervals. Still, each common metric gives you a useful anchor.

Power. If you train with a power meter, a well-paced 4×8 usually settles slightly above your functional threshold power, often in the region of 100 to 105% of FTP for trained riders. Treat that as a guideline, not a rule, because the real goal is repeatability. If you are not sure of your current FTP, set it first with a ramp test so your numbers mean something.

Heart rate. Heart rate lags behind effort, so the first couple of minutes of each rep will feel easier than the number suggests. Expect it to climb into the region of 90 to 95% of your maximum by the second half of the workout. Use heart rate to confirm you are in the right zone rather than to pace minute by minute.

Perceived effort. On a 1-to-10 scale, a 4×8 interval should feel like a solid 8: comfortably hard sliding into uncomfortable by the final two minutes. A good check is to finish each rep believing you could have squeezed out maybe one more at that pace. If you are completely empty after rep two, you started too hard. This effort sits a clear step below the eyeballs-out intensity of shorter VO2 max intervals.

How to Do a Seiler 4×8 Session

Because the intervals are demanding, a proper warm-up is not optional. Jumping straight into rep one with cold legs almost guarantees a poor first interval and a scramble to recover for the rest. Build in gradually, then execute the set with discipline.

Step by Step

  1. Warm up for 15 to 20 minutes. Start easy, then add two or three short 30-second surges near the end to open up your legs and lungs before the real work.
  2. Interval 1: 8 minutes. Settle into your target pace within the first 30 seconds and hold it steady. Resist the urge to hammer.
  3. Recover for 2 minutes. Spin easy in a low gear. Do not stop pedalling.
  4. Intervals 2, 3 and 4. Repeat the eight-on, two-off pattern, aiming to match or slightly exceed your first interval each time.
  5. Cool down for 10 minutes. Easy spinning to flush your legs and bring your heart rate down gradually.

Start to finish, the session runs about 70 to 75 minutes including warm-up and cool-down, with 32 minutes of actual high-quality work. That is a large training stimulus packed into a manageable window, which is part of why time-crunched riders value it so highly.

How to Pace the Four Intervals

Pacing is the single skill that separates a productive 4×8 from a failed one. The most common error is treating interval one like a time trial, going out hard while you feel fresh, then watching your power bleed away over the next three efforts. The workout rewards the opposite approach.

Aim to ride interval one at a pace you are confident you can still hold on interval four. If anything, let the set build: a slight negative split, where reps three and four are marginally stronger than reps one and two, is a sign of near-perfect pacing. The whole point of the format is repeatable high intensity, so your best session is not the one with the highest single interval, but the one with the highest average across all four. When in doubt on the first rep, hold back five watts rather than push five extra.

Where 4×8 Intervals Fit in Your Week

A single hard session only works if the rest of your week supports it. The 4×8 fits naturally into a polarized training structure, where the large majority of your riding is easy and a small, concentrated dose is genuinely hard. In practice that means one, or at most two, interval sessions per week, with the remaining rides kept firmly in zone 2.


Schedule 4×8 sessions on days when you are rested, and leave at least 48 hours between hard efforts so you absorb the work rather than digging a hole. The format shines during a build phase, when you are sharpening your sustainable power ahead of an event. It pairs well with other intensity formats on a rotating basis: you might alternate 4×8 sessions with shorter threshold intervals or punchier Billat 30-30 intervals to hit the aerobic system from different angles across a training block.

Common Mistakes to Avoid

  • Overpacing the first interval. The classic error. Start at a pace you can repeat, not the hardest you can manage while fresh.
  • Doing them too often. Two quality interval days a week is plenty. More intensity without more recovery leads to stagnation, not progress.
  • Skipping the aerobic base. Intervals build on a foundation of easy volume. Without that base, you fatigue faster and recover slower between sessions.
  • Under-fuelling. Thirty-two minutes of high-intensity work burns through carbohydrate quickly. Come to the session fed, and take on fuel on longer days.
  • Chasing a single hero number. A new best for one interval means little if the other three fell apart. Judge the session by its average.
  • Cutting the warm-up. Cold legs make the first interval feel brutal and skew your pacing for the rest of the set.

Who Should Do 4×8 Intervals?

The 4×8 is best suited to intermediate and experienced riders who already have a solid aerobic base and some history with structured intensity. For those cyclists it is close to an ideal return on time: a short, repeatable session with a strong evidence base for lifting both VO2 max and threshold power.

If you are newer to cycling or coming back from a long break, build an aerobic foundation first and introduce intensity gradually before adding a full 4×8. You might start with 3×6 minutes, or two longer intervals, and grow into the complete session as your fitness allows. Riders managing health conditions or returning from injury should check with a professional before adding maximal-style work.

The Bottom Line

Seiler 4×8 intervals endure because they are simple, time-efficient, and backed by real data. Four eight-minute efforts at a repeatable hard pace, two minutes of easy spinning between, wrapped in a thorough warm-up and cool-down. Pace them so your fourth interval is as strong as your first, keep the rest of your week easy, and run them once or twice a week during a build phase. Do that consistently, and this unassuming session will quietly become one of the most valuable workouts in your training.

Photo of author
BikeTips Staff articles are written and edited by the BikeTips team. We cover bikes, gear, maintenance and training for everyday riders, and every piece is reviewed by an editor before it's published.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.