Cadence Can Swing Your Cycling Power Test by 45 Watts

Photo of author
Written by
Published:

Two cyclists can finish the exact same laboratory fitness test, post power numbers that look 45 watts apart, and still have virtually identical aerobic engines. New research suggests the culprit may be hiding in plain sight on every bike: pedaling cadence.

A study published on November 1, 2026 in the Journal of Science and Cycling found that spinning the pedals at 70, 90, or 110 revolutions per minute (rpm) produced strikingly different power readings at key training thresholds — even though the riders’ underlying fitness never changed. For anyone who sets training zones off a lab test, a smart trainer, or a power meter, it is a finding worth understanding.

What Happened

The study, titled “Cadence influences exercise thresholds and peak power output from a ramp test in recreational cyclists,” was led by Matthew Van Dyck of Ghent University in Belgium. Nine healthy male recreational cyclists, averaging 22.4 years of age, each completed three ramp tests to exhaustion — one at 70 rpm, one at 90 rpm, and one at 110 rpm — with the order randomized. Throughout each test, researchers measured respiratory gas exchange to pinpoint the first ventilatory threshold (VT1), the second ventilatory threshold (VT2), and peak power output.

The headline result showed up at VT2, the physiological marker that roughly signals the shift into genuinely hard, high-intensity riding. Average power at VT2 measured 284 watts at 70 rpm, 260 watts at 90 rpm, and just 239 watts at 110 rpm. That is a 45-watt gap between the slowest and fastest cadence — about 16% of the 70 rpm figure — produced by the same riders on the same legs, simply by changing how fast they spun.

VT1 moved in the same direction: 218 watts at 70 rpm, 198 at 90 rpm, and 182 at 110 rpm. Peak power output also slid as cadence climbed, from 424 watts at 70 rpm to 414 at 90 rpm and 399 at 110 rpm — a smaller 25-watt (roughly 6%) spread. Time to exhaustion shrank too, from an average of 747 seconds at 70 rpm to 696 seconds at 110 rpm.

Here is the twist that makes the study interesting: peak oxygen uptake (VO2peak) barely budged, measuring 4.2, 4.0, and 3.9 liters per minute across the three cadences — a difference the researchers did not consider statistically significant. In other words, the riders’ maximum aerobic capacity stayed essentially flat while their threshold power numbers swung dramatically.

There is a mechanical logic underneath the numbers. At any given power output, a lower cadence demands more torque on each pedal stroke, while a higher cadence spreads the work across more revolutions but raises the metabolic and neuromuscular cost of spinning. The study does not crown a winner between the two — it simply shows that where your threshold lands on the power scale moves with the cadence you choose.

Why It Matters

VT1 and VT2 are not just lab trivia. They are two of the most common anchors coaches use to build a rider’s training zones. VT1 marks where easy aerobic riding starts to get more demanding; VT2 marks the ceiling where intensity turns the screws and lactate begins to accumulate quickly. If the wattage attached to those thresholds depends partly on cadence, then the same “threshold” power target may not represent the same physiological stress once your legs are spinning faster or slower.

The researchers quantified that sensitivity. Their regression analysis estimated that VT2 power fell by about 1.15 watts for every additional rpm, compared with 0.96 watts at VT1 and 0.66 watts at peak power. Put simply, the higher-intensity threshold most of us care about for interval work is also the measurement most easily shifted by cadence.

It is worth stressing what the study does not claim. A lower power number at 110 rpm does not mean the rider got weaker or that 70 rpm is the “best” cadence. The same group produced all three sets of numbers in the same testing window. The point is that the test conditions — including cadence — are baked into the result. This echoes a broader theme in recent cycling science: a separate study of 28 cyclists found that the respiratory compensation point tracked time-trial performance more closely than VO2max, another reminder that a single headline metric rarely tells the whole story.

What This Means for You

If you train with a power meter or smart trainer, the practical takeaway is about consistency, not chasing a magic cadence. Imagine you test in spring at a comfortable 90 rpm and set your threshold at 260 watts, then retest in autumn after a summer of grinding big gears at 75 rpm. The autumn number might look higher — but part of that gain could simply be the slower cadence, not new fitness. Comparing tests done at different cadences risks mixing up real adaptation with testing noise.

A few concrete habits help:

  • Record the cadence you held during any ramp test or threshold assessment, and try to repeat it when you retest so your numbers stay comparable.
  • Remember that ventilatory thresholds are not the same thing as Functional Threshold Power (FTP). FTP comes from field or 20-minute protocols; VT1 and VT2 come from gas-exchange data. Do not treat them interchangeably.
  • When you interpret a change in threshold watts, ask whether anything about the test — cadence, trainer, warm-up, fatigue — changed alongside your training.
  • Use the number as a guide, not gospel. Understanding your cycling economy and how efficiently you turn oxygen into watts matters as much as the headline figure.

If you build sessions around your second threshold — the classic threshold intervals that so many plans lean on — this is a nudge to keep your interval cadence roughly consistent with the cadence you tested at. Otherwise the prescribed wattage may feel easier or harder than intended.


None of this means you should abandon lab testing or power-based training. The numbers are still some of the most useful feedback a cyclist can get. The lesson is subtler: treat a threshold figure as a measurement taken under specific conditions, not as a fixed property of your body. When two tests disagree, the first question is not “did I get faster or slower?” but “were these two tests actually run the same way?” That habit alone will make your season-to-season comparisons far more trustworthy.

The Caveats

This was a small study — nine young, male, recreational riders — so the exact size of the 45-watt swing should not be generalized to women, older athletes, or elite racers without more data. It also used ramp tests to exhaustion, not steady-state efforts, outdoor climbs, or time trials, so it cannot tell us how cadence shifts play out over a three-hour ride or a repeated-interval session. And it deliberately did not rank cadences by efficiency or endurance — those questions depend on intensity, duration, and individual physiology. As with recent work on blood flow restriction during recovery, the sample is a starting point, not the final word.

Key Takeaways

  • A November 2026 Journal of Science and Cycling study found pedaling at 70 vs. 110 rpm changed VT2 power by about 45 watts in the same riders.
  • VO2peak stayed essentially unchanged, so the swing reflected testing cadence, not a change in aerobic fitness.
  • VT2 was the most cadence-sensitive measure (about 1.15 watts per rpm), and VT1 and peak power shifted in the same direction.
  • To keep test results comparable over a season, note and repeat your cadence — and do not confuse ventilatory thresholds with FTP.

Source: research published November 1, 2026 in the Journal of Science and Cycling, led by Matthew Van Dyck (Ghent University), as reported by TodoMountainBike.

Photo of author
With over a decade of experience as a certified personal trainer, two Masters degrees (Exercise Science and Prosthetics and Orthotics), and as a UESCA-certified endurance nutrition and triathlon coach, Amber is as well-qualified as they come when it comes to handling sports science topics for BikeTips. Amber's experience as a triathlon coach demonstrates her broad and deep knowledge of performance cycling.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.